Edit sector space disk devices.
The program allows to perform hexadecimal-character value of the sector (Fig. 33), the table partitions (Fig. 34) or FAT-32 (Fig. 35).
The inclusion of the adjustment is made by pressing function key F9.
Fig. 34. the Correction hexadecimal-character values(F2).
Fig. 35. the Adjustment of the table partitions(F7).
Fig. 36. the Adjustment of the table partitions (F5).
To do this, press the function key F9. The value of the adjusted values
displayed in blue, and the current position of the adjustable props encircled by a blue frame.
To move the current position of the adjustable props you can use key with the arrow.
Switching from binary to character an adjustment is made pressingTAB.
Save the corrected value of the sector by pressingF12.
To cancel the adjustment, press Esc.
Edit sectoral space disk devices is possible only in the licensed version of the program.
The correction functions are controlled by their functional menu "Adjustment and recording", Fig. 37:
|
![Recovery data function menu [Correction].](ANIM/FomsoftDiskEditorEng37.jpg)
Fig. 37. the Functional menu "Adjustment".
|
To protect against accidental recording on a disk in the device before a write operation on a disk device, the program checks
the presence in the latter sector zero track special the sequence "WRITING ENABLED". If this sector
contains hexadecimal zeros, as it happens in most cases, the program believes that the record on this disc prohibited.
If the second sector contains information other than hexadecimal zeros, it is possible to program a recording on this disc will be blocked.
This way you can protect your system discs that cannot be recorded, from accidental changes.
Enable writing to the disk.
In order for the program to write to disk, it needs to be licensed and to have a special mark that allows him to write. For this
the user must call the function menu "Correction" and select
"Allow writing to the disk", Fig. 38.
Fig. 38. the Menu "Enable write".
For the write permission on a particular disk, you must select the check box to the left of the designation of that disk and press dialog
click "APPLY".
Deny write to disk.
In order for the program could not write to disk, it is necessary to remove a special tag that allows him to write. For this
the user must call the function menu "Correction" and select
"Deny write to disk", Fig. 39.:
Fig. 39. the Restore the data recorded on the disc.
To prohibit recording on a particular disk, you must select the check box to the left of the designation of that disk and press dialog
click "APPLY".
Remove the write lock.
If the physical sector (LBA-62) does not contain at the beginning of the signature "WRITING ENABLED", or the value of all bytes is
zero, the program assumes the disk is locked for writing. To perform recording on this drive is necessary to preserve the value
the second sector (LBA-62), if necessary, in a safe place, for his subsequent recovery. Next, call the function menu
"Correction" and select "unlock account", Fig. 34.
Fig. 40. the Remove the write lock.
To unlock the account on a particular disk, you must select the check box to the left of the designation of that disk and press dialog
click "APPLY".
|
|
